Flaem Universal Plus, Instructions For Use Manual

Page: 16 / 60

16 17
neBUlizer
Power: 15V
Absorption: 850 mA
Frequency: 2.4 MHz
Operation: 30 min ON/ 30 min OFF
Automatic switch-off : after 10 minutes
Max tray capacity : 6 ml.
Max. operating speed
(1)
: 0.7 ml/min approx
MMAD
(2)
: 1.9 μm
(1) Tests performed with phys. sol. 0.9% NaCl according to Flaem internal procedure.
(2)
Certified with TSI Aerosizer 3220 computerized laser system according to Flaem internal procedure.
Noise (at 10 cm): < 50 dB(A)
Dimensions: 9x5x12h cm
Weight: 200 g
In conformity with:
0051
Dimensions of bag: 20x13x13h cm
Weight of bag:
(complete with appliance and accessories) 1 Kg
Operating conditions: Temperature: min 10°C; max 40°C
Air humidity: min 10%; max 95% RH
Storage conditions: Temperature: -25°C; max 70°C
Air humidity: min 10%; max 95% RH
Operating/storage atmospheric pressure: min. 690 hPa; max. 1060 hPa P
PoWer sUPPly Unit
Use only power supply unit code 10529
Primary: 230V~ 50Hz
Secondary: 15V 850mA
Dimensions: 10x7x9 cm
Weight: 510 g
technical sPeciFications
Mod. Universal PlUs
ELECTROMAGNETIC COMPATIBILITY
This device has been designed to satisfy requirements currently required for electromagnetic compatibility (EN 60 601-
1-2:2007). Electrical medical devices require special care. During installation and use with respect to EMC requirements,
it therefore required that they be installed and/or used according to the manufacturer’s specification. Potential risk of
electromagnetic interference with other devices, in particular with other devices for analysis and treatment. Radio and
mobile telecommunications devices or portable RF (mobile phones or wireless connections) may interfere with the
operation of electrical medical devices. For further information visit www.flaemnuova.it. Flaem reserves the right to make
technical and functional changes to the product without notice.
DEVICE DISPOSAL
In conformity with Directive 2002/96/EC, the symbol shown on the appliance to be disposed of indicates that
this is considered as waste and must therefore undergo “sorted waste collection”. The user must therefore take (or
have taken) the above waste to a pre-sorted waste collection centre set up by the local authorities, or else give it back to
the dealer when purchasing a new appliance of the same type. Pre-sorted waste collection and the subsequent treatment,
recovery and disposal operations favour the production of appliances made of recycled materials and limit the negative
effects of any incorrect waste management on the environment and public health. The unlawful disposal of the product
by the user could result in administrative fines as provided by the laws transposing Directive 2002/96/EC of the European
member state in which the product is disposed of.