Flaem Universal Plus, Instructions For Use Manual

Page: 15 / 60

14 15
TROUBLESHOOTING
ProBleM reMedy
1. While pressing the handset button the green
led is not lit.
- Make sure that the handset and the power
supply unit are properly plugged in.
2. In the case of poor nebulisation - Make sure that the drug is not too cold – drug
temperature should be close to room tem-
perature.
3. If the unit does not nebulise - Make sure that the upper part is correctly fit-
ted in.
- Check that the nebulizer contains medica-
tion.
- Make sure that quantity of medication is be-
tween 4 and 6 ml max.
- Check that the medication is diluted suffi-
ciently with saline solution 0.9%.
- Make sure the adjustment knob and the disc
underneath are perfectly clean.
- Make sure the medication is not glycol based.
4. If the appliance interrupts nebulisation and
the green LED flashes, this means there is no
more medication
- Put some more medication into the tray or
proceed to clean and disinfect.
5. Failure to clean the nebulizer from drug de-
posits may endanger proper operation of the
unit.
- Carefully follow the instructions for cleaning
and disinfection.
Should the unit again fail to operate after following the above instructions, please contact
your local dealer or authorised after-sales centre.
NOTICE (ref. A Directive 2007/47/EC)
Flaem Nuova SpA has been manufacturing top-quality electro-medical appliances for the past 40 years
or more, using carefully selected and tested materials in compliance with the requirements of reference
directives and standards, with patient/user safety as number one priority. Because of this, we are able to
state that the use of the Flaem device and original accessories purchased by you does not involve any risk
whatsoever for the user’s health.
The specific tests conducted at accredited laboratories (as per UNI EN ISO 10993-17: 2004 rule on Biological
Assessment Part 17 Definition of allowable limits for leachable substances) actually demonstrate that the
BPA used is released in amounts much lower than the maximum allowed for the safety threshold.