Electricity
Power: 400 V AC
Frequency: 50 Hz
Absorbed power
4.5. Working place, placement and establishment
The contact grill is placed on a table or similar surface in an appropriate working height.
The contact grill is operated from the front and for the sake of ventilation, free passage
of air should be allowed under and behind the machine. The contact grill should be placed
under the hood or other of extraction of substantial odour.
5. Safety and risk
5.1. Safety instructions which are made by the user
It is recommended that the user wears gauntlet when working with the machine since
both top and lower pan are very hot. Do not touch these pans when working with the
machine.
6. Operation
6.1. Start
The contact grill is turned by twisting the main switch which is placed on the back of
the machine. Switch the thermostats to 100°C at both heat zones and leave the heat to
disperse. When the control light is turn off, set the requested temperature.
During heating and when the heating elements are active, the control light will be switched
on in the front.
It is recommended to check the temperature on the working surface using a thermometer,
since the calibration of the thermostat can deviate from the scale on the front of the
machine. The contact grill is switched off by turning the scale to zero.
5
Model
Connection
voltage
Power
Absorbed
power
Min. fuse in
installation
GL 2002
400V
6,6kW
9,53A
10 A
