Fisher Scientific Isotemp 100L Incbtr Grvity 120V, User Manual

Page: 64 / 86

6SDUH3DUWVDQG8VHU0RGLILFDWLRQV
7RDYRLGPDMRUPDOIXQFWLRQVRIWKHLQFXEDWRUDQGDVVRFLDWHG
VDIHW\KD]DUGVWKDWPD\UHVXOWLQGHDWKVHULRXVLQMXULHVRU
GDPDJHWRWKHLQFXEDWRUDQGRWKHUHTXLSPHQWXVHVSDUHSDUWV
DSSURYHGE\)LVKHU6FLHQWLILFRQO\7KLUGSDUW\VSDUHVZLWKRXW
)LVKHU6FLHQWLILFDSSURYDOYRLGWKHOLPLWHGZDUUDQW\
'RQRWPRGLI\WKHLQFXEDWRULQDQ\ZD\ZLWKRXWREWDLQLQJWKH
SULRUZULWWHQDXWKRUL]DWLRQIURP)LVKHU6FLHQWLILF8QDXWKRUL]HG
PRGLILFDWLRQVPD\FRPSURPLVHRSHUDWLRQDOVDIHW\DQGJLYHULVH
WRKD]DUGVWKDWPD\UHVXOWLQGHDWKVHULRXVLQMXULHVRUGDPDJHWR
WKHLQFXEDWRUDQGRWKHUHTXLSPHQW
0DLQWHQDQFH
6HUYLFH,QWHUYDOV
*UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV )LVKHU6FLHQWLILF
6HUYLFH,QWHUYDOV
During running operation, the following service works must be performed:
PRQWKO\VHUYLFH
• Perform the comparative temperature measurement outlined in the following section.
$QQXDO6HUYLFH
• Have the incubator inspected and services by a Fisher Scientific authorized Technical
Service agent.
6HUYLFHFRQWUDFW
)LVKHU6FLHQWLILF,QWHUQDWLRQDO//&RIIHUDSURGXFWVSHFLILF
VHUYLFHFRQWUDFWFRPSULVLQJDOOQHFHVVDU\WHVWVDQGVHUYLFHZRUN
3UHSDULQJ7HPSHUDWXUH&DOLEUDWLRQ
To determine the exact measured value of the incubator’s integral temperature sensor, a
temperature comparison measurement must be performed every three months. If a major
temperature deviation is found during this check, temperature calibration is required. During
this process, the temperature controller of the incubator is set to the value measured during
the temperature comparison measurement.
Use a calibrated measuring instrument with an accuracy of < ± 0.1 °C (0.18 °F) for this test.