Fisher Scientific Isotemp 100L Incbtr Grvity 120V, User Manual

Page: 43 / 86

)LVKHU6FLHQWLILF *UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV
6
2SHUDWLRQ
3UHSDULQJWKH,QFXEDWRU
The incubator must not be released for operation before all major start-up activities have been
completed (see
chapter 5, “Start-up.” ).
'HYLFH&KHFN
Prior to starting operation, the following incubator components must be checked for their
correct function:
• The door seal in the front frame must not be damaged.
• The glass door must not be damaged.
• The shelving components must be installed safely.
• Disinfecting the Incubator’s Work Space.
Disinfect the work space according to the operator-specified hygiene guidelines.
6WDUWLQJ2SHUDWLRQ
1. Turn the incubator on using the control panel.
2. Adjust the temperature set value on the control panel.
3. The temperature controller starts adjusting the work space to the user-specified
temperature set value now.
7RDYRLGDQ\ULVNRIH[SORVLRQRUILUH
4. Load the work space with samples.
‡ UHIUDLQIURPORDGLQJWKHLQFXEDWRUZLWKDQ\RIWKHVXEVWDQFHV
OLVWHGLQWKHVHFWLRQ ³,QFRUUHFW8VH´ RQ SDJH
‡ PDNHVXUHWKDWWKHDPELHQWDLULVIUHHRIDQ\VROYHQWV
‡ GRQRWRSHUDWHWKHLQFXEDWRULQDUHDVZLWKDQH[SORVLRQKD]DUG