Fisher Scientific Isotemp 100L Incbtr Grvity 120V, User Manual

Page: 38 / 86

6WDUWXS
&RQQHFWLQJ3RZHU
*UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV )LVKHU6FLHQWLILF
)LJXUH5HPRYLQJWKHUHDUDLUEDIIOH
On the 85911-430 model loosen and remove the six (6) screws for the rear air baffle and
bottom air baffles and then remove the air baffles.
Check to ensure that the air baffles are securely screwed into place after cleaning and moving
the unit.
/HYHOOLQJWKH7DEOHWRS,QFXEDWRU8QLW
1. Position a bubble level onto the center shelf.
2. Manually adjust the levelling feet until the shelf is horizontally aligned in all directions.
Perform the adjustment of the levelling feet from left to right and from rear to front.
&RQQHFWLQJ3RZHU
(OHFWULFVKRFN
&RQWDFWZLWKOLYHHOHFWULFDOFRPSRQHQWVPD\FDXVHDOHWKDOHOHFWULF
VKRFN%HIRUHFRQQHFWLQJWKHLQFXEDWRUWRWKHSRZHUVXSSO\FKHFN
WKHSRZHUFRUGDQGWKHSOXJIRUGDPDJH'RQRWXVHGDPDJHG
FDEOHVIRUFRQQHFWLQJWKHLQFXEDWRUWRWKHSRZHUVXSSO\
The incubator has a class I, protection-earthed enclosure. To minimize the risk of electrical
shock, use the AC power cord supplied to connect the incubator to a correctly installed and
protection-earthed power supply source, with the following features in place for each
incubator:
• T 16 A slow-blow fusing
• B 16 circuit breaker
• FI circuit breaker