Fisher Scientific Isotemp 100L Incbtr Grvity 120V, User Manual

Page: 37 / 86

6WDUWXS
3UHSDULQJWKH:RUN6SDFH
)LVKHU6FLHQWLILF *UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV
1. Push the shelf [4] onto the shelf support with the tilt protection devices [2] facing the rear
panel of the incubator.
2. Slightly raise the perforated shelf so that the pull-out stops [1] and [3] can slide over the
shelf support.
3. Make sure that the shelves and both of their tilt protection devices are free to move over
the shelf support.
,QVWDOOLQJ5HPRYLQJDLUEDIIOHV
The section below describes how to install/remove the bottom plate.
)LJXUH5HPRYLQJWKHERWWRPSODWH
1. Loosen and remove the four (4) screws in the bottom plate and then remove the bottom
plate completely.
)LJXUH5HPRYLQJWKHOHIWDQGULJKWVXSSRUWSURILOHV
Loosen and remove the eight (8) screws for the left and right support profiles and then take
out the lateral air baffles.