Fisher Scientific Isotemp 100L Incbtr Grvity 120V, User Manual

Page: 66 / 86

0DLQWHQDQFH
5HSODFLQJWKH'RRU6HDO
*UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV )LVKHU6FLHQWLILF
5HSODFLQJWKH'RRU6HDO
The door seal of the outer door is located in the retaining slot.
The door seal should be inspected for any signs of embrittlement at half-yearly intervals.
No tools are required to replace the seal.
)LJXUH'RRU6HDO5HSODFHPHQW
1. Pull the seal out of the guide slot.
2. Starting on the hinge side of the door, position the end of the new seal at the location
indicated by the arrow in figure 10-1 above.
3. Gently press the seal into the slot, working around the circumference of the door. In
corner areas in particular ensure that the seal lip is installed without any wrinkles and that
the seal is not stretched or compressed.
4. Make sure that the seal is positioned correctly in the slot and flush with the door frame.
Correct, if necessary.
5HSODFLQJWKH3RZHU&RUG
If the power cord is damaged, it must be replaced by an original spare part. Using a standard
power cord with a lower thermal withstand capabilities is prohibited.