- 35 -
Replace the power module if no other component faults can be found.
(Refer to Servicing Instructions Section 7.9)
5.12
SYMPTOM: Oven Lights do not turn On / Off
POSSIBLE CAUSES:
·
Blown oven light bulbs
·
Faulty oven door switch
·
Faulty
wiring
·
Faulty power module
PROCEDURE:
Replace bulb if only one light not working.
Check for oven door switch faults if lights do not turn off.
(Refer to Section 5.25).
Check for oven light faults.
(Refer to Section 5.21).
Replace the power module if no other component faults can be found.
(Refer to Servicing Instructions Section 7.9)
5.13
SYMPTOM: Fault Code F1 displayed in Tech Select only
(Refer to 4.0 Diagnostics)
CAUSE:
Maximum allowable temperature (185°F, 85°C) around electronics was exceeded.
PROCEDURE:
Check for cooling fan fault or vent blockages. (Refer to Section 5.19)
5.14
SYMPTOM: Fault Code F2 displayed
CAUSE:
Maximum allowable cavity temperature was exceeded during Self-Clean Pyro cycle.
PROCEDURE:
Check for temperature sensor faults.
(Refer to Section 5.23)
Check for oven element faults.
(Refer to Section 5.22).
Replace the power module if no other component faults can be found.
(Refer to Servicing Instructions Section 7.9).
