- 16 -
MTL
(Microtemp Limiter)
This is a non-resettable thermal limiter positioned to detect
electronics area over temperature caused by a cooling fan
failure. When it trips it will cut power to the power
transformers disabling the oven.
Capacity Rating:
25 Amps at 240
VAC.
Trip Temperatures:
200
°
F (93
°
C)
TL 1 & TL 3
These are non-resettable thermal limiters positioned to
detect the lower cooling fan failure on a double oven. It will
cut power to the oven elements when tripped.
Capacity Rating:
25 Amps at 240
VAC.
Trip Temperatures:
175
°
F (80
°
C)
TL 2
This is a non-resettable thermal limiter positioned to detect the upper cooling fan failing when
using the lower cavity in a double oven. It will cut power to the oven elements when tripped.
Capacity Rating:
25 Amps at 240
VAC.
Trip Temperatures:
340
°
F (170
°
C)
TL 4
This is a non-resettable thermal limiter positioned to detect lower cavity element run-away in a
double oven. It will cut power to the oven elements when tripped.
Capacity Rating:
25 Amps at 240
VAC.
Trip Temperatures:
300
°
F (150
°
C)
TL 5
This is a non-resettable thermal limiter positioned to detect element run-away and will cut power
to the oven elements when tripped.
Capacity Rating:
25 Amps at 240
VAC.
Trip Temperatures:
230
°
F (120
°
C)
2.28
Isolating Relay
(Not in NZ / AUS models)
Note:
This controls L2 of the elements, oven cavity
fan and exhaust fan.
It does not switch the load and is only on when an
oven mode is selected.
Coil Voltage
12
VDC
Coil Input
1 watt
