517792A
40
Action:
Replace the Thermistor (temperature sensor).
Secondary Source:
Motor Control Module has failed to read the temperature. Check
connections.
Action:
Replace Motor Control Module if connections look fine and the fault
still occurs.
238. (11101110) Lid Lock Fail In-Line Test (1)
Final on line tests, final check before going to the field.
239. (11101111) Lid Lock Fail In-Line Test (2)
Final on line tests, final check before going to the field
240. (11110000) Hall Out Of Order. RPS Fault
Same as previous Hall Error faults See fault code130 for directions.
241. (11110001) Function Time Out
Display crashed.
Primary Fault:
Display Module has failed.
Action:
Replace
Display
Module.
Secondary Fault:
Motor Control Module has failed.
Action:
Replace Motor Control Module.
243. (11110011) Stepper Test Failure
Rotor Position Sensor fault. The Motor Control Module has attempted a motor step test
and found the motor has not stepped to the correct position.
Primary Fault:
Wiring.
Action:
See Fault codes 53 and 54.
252. (11111100) Bridge Test Failure
The Motor Control Module has tested the motor bridge electronics and sensed current
when there should not have been any.
Primary Fault:
Motor Control Module
Action:
Replace Motor Control Module
