517792A
21
3
SIZE SETTING MODE
To set the size switch, turn the power on at the power point and off at the console. Press and hold
WASH TEMPERATURE SETTING UP
then press
POWER
. EcoSmart
â
will give 4 short beeps
and the pattern of LEDs will change.
To lock the size into memory.
·
Press
SPIN SPEED UP
,
the
SPIN HOLD
LED is on for
7.5 / 8.0kg
(650mm wide).
·
Press
POWER
to confirm the setting and also exit this mode.
If the size setting is wrong, EcoSmart
â
will have the following settings incorrect: -
·
The Auto Water Levels chosen may be incorrect.
·
The High Water Level may be incorrect by as much as 40mm.
·
The wash profiles may be incorrect resulting in poor wash performance or vigorous wash
actions causing tangling, splash over or excess linting.
·
Water
saver
settings.
4 DIAGNOSTIC
MODE
To enter diagnostic mode follow the steps below.
1. Turn the power on at the power point but off at the machine.
2. Press and hold
WASH TEMPERATURE SETTING DOWN
and then press
POWER
until the
machine gives 2 short beeps and lights up.
3. Release the buttons after the beeps as the beeps indicate diagnostic mode has been entered.
4.1 Last
Fault
Data
When in diagnostic mode the last fault can be found by pressing the
SPIN SPEED UP
or
DOWN
buttons until the
HOLD
and
SLOW
lights are illuminated. Binary can then be read from the wash
progress lights.
4.2 Drain
Pump
Test
GW Washer
When in diagnostic mode press
REGULAR
to activate the drain pump. To deactivate the pump,
press
REGULAR
again.
4.3
Water Valve Test
The water valves can be activated in diagnostic mode by pushing
WASH TEMPERATURE
SETTING UP
to activate the
Hot Valve
and
WASH TEMPERATURE SETTING DOWN
to activate
the
Cold valve
as with previous models.
Pressing each button once will activate the valve. To de-activate valve press the same button
again. This is also good to use when installing machines as it takes the shock out of the fittings
and seals and allows checking for leaks on the inlet hoses, both machine end and tap or super-tub
end.
Caution: Do not leave the machine unattended when either or both valves are operating.
128 64 32 16 8 4 2 1
