background image

If you are new to installing Firstech Series Remote Starts and / or Alarms, we highly recommended that you thor-

oughly review this manual to installing your first unit.

Key Points to Consider Before Installation:

Options must be set before installation 

 

 

 

 

 

 

 

 

The options for the FT-820 must be set via your computer. Please load the FT820 software to choose the vehicle 

make and model, set options, and program your unit before installation. 

Please familiarize yourself with the wiring of the FT-820

The FT-820 is designed for quick installation with the use of supplied Y-adapter connector for the vehicle’s main 

ignition harness. The Y-adapter is designed to connect in line with the factory’s ignition harness. Other harness are 

plug and play minus the foot brake, e-brake and ISO9141-2 and/or CAN High and Low wires 

Green loop must be cut for AUTOMATIC transmission vehicles 

 

 

 

By default, FT-820 units come in MANUAL transmission mode. You will need to cut the green loop inside the con-

trol module if you are installing the unit in a AUTOMATIC transmission.

You must code remotes to this system before anything will function  

 

 

Program remotes by cycling the ignition ON / OFF five times within seven seconds and tap button 1 (0.5 seconds) on 

the first remote, and then tap button 1 (0.5 seconds) on the second remote.

RPS-II (Remote Paging Sensor)   

 

 

 

 

 

 

 

This unit has an optional RPS that has three main functions; 1. Status LED, 2. Remote notification when triggered, 

and 3. Auto unlock/alarm disarm when a user specific 4 digit knock code is entered via tapping sensor through the 

windshield.   

 

Firstech Shock Sensor

 

This unit has an optional shock sensor that can be added to the FT-820. The sensor comes with the cable and just has 

to be plugged in.

Firstech Thermistor

 

This piece has the ability to monitor temperature in the vehicle using 2 Way LCD remotes only. This is not included 

with the FT-820.

    

p

osT

 I

nsTallaTIon

 C

HeCKlIsT

                                                                          fT-820

fT-820 I

nsTall

 G

uIde

H

yundaI

 / K

Ia

 R

emoTe

 s

TaRT

 

and

 a

laRm

www.firstechllc.com /ft820 | www.compustar.com/ft820

Copyright 2009 Firstech, LLC.

Page 11

Summary of Contents for FT820

















Reviews: