background image

Firstech FT-820 control modules include the following:

- FT-820 main control module 

- FT-820 wiring guide and info sheet

- Main ignition wiring harness with Y-adapter  

- Separate starter kill relay

- Wiring harnesses 

The following sensors are available but not included with the FT-820 system: 

- Thermistor temperature sensor (2 Way remote LCD systems only) P/N: FT-TEMP SENSOR

- Remote pager sensor (RPS-II) (Optional on 2 Way remote LCD systems only) P/N: FT-RPS II

- Firstech dual stage shock sensor P/N: CompuShock 

The remote(s) and antenna are available in the RF blister packaging. You have the ability to pair almost any Firstech 

remote(s) and antenna receiver to the FT-820. This is limited to 5P LCD remotes. 

The FT-820 settings and options must be programmed using the FT-820 software. You must choose the vehicle make 

and model, options, and whether its on an automatic or manual transmission.  

STEP 1: Go to www.compustar.com/ft820 and download the UpdateSetup.exe Double 

click the icon labeled UpdateSetup V1.3. Follow your on screen instructions to load the 

FT-820 update program. Update V1.3 icon will appear on your desktop. Double click to 

open.

STEP 2: Connect the FT-820 control module to the 6 pin uploader cable shown to the 

right. The 6 pin connector will connect to the antenna port on the control module. 

STEP 3: See Figure 2 on the next page. Click on the drop down menu in the top right 

corner of the FT-820 software window. This will be to select which vehicle make and 

model the system is being installed on. You must also select whether it is being installed on a manual or automatic 

transmission. Under program version you must select the firmware for the FT-820 which in our sample is called: 

“MM_FT820_US_TEST_V1.0.ENC” See figure 3 for an example.   

The option table will be available on the FT-820 software. Click the check boxes to select the particular option set-

ting. 

 

STEP 4: When finished changing option settings click the UPLOAD DATA button to write the options and finalize 

the FT-820 control module for installation.

    K

IT

 C

onTenTs

    

 

 

 

 

 

 

 

 

    fT-820

    

C

onneCTInG

 

and

 p

RoGRammInG

 

THe

 fT-820                                                fT-820

fT-820 I

nsTall

 G

uIde

H

yundaI

 / K

Ia

 R

emoTe

 s

TaRT

 

and

 a

laRm

www.firstechllc.com /ft820 | www.compustar.com/ft820

Copyright 2009 Firstech, LLC.

Page 5

Summary of Contents for FT820

















Reviews: