Option 2-5 and 2-6
Option 2-5 and 2-6 affect each other depending on settings. When you change option 2-5 as shown on the three tables
below option 2-6 changes from Rearm output to Horn output or Aux1 output.
1-01
Turbo Mode
– This option will adjust the run time after Turbo mode has been engaged. The available options
are shown in the table above. You must manually arm the vehicle after closing the door. It does not automatically
arm. The emergency brake input must be connected and the feature must be turned on through the remote for this
feature to work.
1-02
Timer or Temperature Start
– This option dictates the time interval when the control module will either re-
mote start or check the temperature and remote start.
Default 1: Will start every 3 hours until the vehicle is remote started or started by key and run for 4 minutes.
Option 2: Will start every 1.5 hours until the vehicle is remote started or started by key and run for 4 minutes.
Option 3: Will start at the time specified on the 2 Way remote once within 24 hours and run based on Option 1-03.
Option 4: Will start once every 24 hours if the temperature falls below Option settings 2-02 or above Option settings 2-03.
For example, if you want your car to start and run 25 minutes when the temperature falls below 5°F, you need to set up the following options:
1) Option 2-01 (Cold Start) turned on,
2) Option 1-02-IV (24 hr. repeat) turned on,
3) Option 1-03-II (25 min run-time) turned on,
4) Option 2-02-IV (Temp 5°F) turned on,
**Turn on Timer Mode of the 2 way LCD remotes (see User’s Guide)
o
pTIon
d
esCRIpTIons
fT-820
fT-820 I
nsTall
G
uIde
H
yundaI
/ K
Ia
R
emoTe
s
TaRT
and
a
laRm
www.firstechllc.com /ft820 | www.compustar.com/ft820
Copyright 2009 Firstech, LLC.
Page 7
