www.firstpaymentmerchantservices.co.uk
axept®
S800 User Guide v1.6
8
1.4
Initial Terminal Setup
01
Insert the thermal paper roll into the
axept®
S800 terminal.
•
Pull lever on the terminal to open the lid (as highlighted)
•
Insert paper roll leaving at least 1cm exposed
•
Close Lid
02
Turn the
axept®
S800 over so the connections on the underside are
visible.
Connect the power supply into the socket labelled ‘Power’ (as
highlighted).
Connect the Ethernet cable (providing internet connectivity) to the port
labelled ‘LAN/RS232B’ (as highlighted).
03
Once connected, run the cables through the cable management sections
of the
axept®
S800 (as shown left).
This ensures that the cables are protected and the
axept®
S800 terminal
will sit flat on the desk/counter.
