16
®
10. STORAGE
SureFire II™ HTSS
electrical high tension igniter should be stored in a clean, dry environment and in its original
packaging if possible.
In the case of long length rods always keep them in a horizontal position by supporting both ends and in the middle.
The igniter should also be protected from contamination using the original packaging or wrapping it with foil.
Storage over 30 days: relative humidity of no more than 85%, temperature below 50°C.
NOTICE
:
THE MANUFACTURER RESERVES THE RIGHT TO CARRY OUT
MODIFICATIONS TO THE PRODUCT DESCRIBED IN THIS INSTRUCTION MANUAL
AT ANY TIME AND WITHOUT ANY ADVANCE NOTICE.
11. ORDERING INFORMATION
Before ordering, please provide the data as in Appendix 1
.
Tables 1 – 4 below show examples of the rod Part Numbers every 0.5 metre as well as power packs and spare parts
for HTI igniter type
HTSS
.
Part Number coding sample:
HTSS-0.5-J
- means
HTSS
rod for the
SP-32-NG/PG-FD-0.5
,
SP-32-NG/PG-ND-0.5
,
SP-48-NG/PG-ND-0.5
or
SP-48-NG/PG-FD-0.5
gas pilot of insertion length 0.5 metre.
This
HTSS
rod has real insertion length of 0.65 m to the ignition point (see p. 2). The additional length of 150
mm allows the igniter to pass though the active end of Fireye gas igniters (pilots).
If the igniter is to be used for general use (not in
SP-32
or
SP-48
Fireye gas pilots
), please take into account the real
insertion length of rod to the spark point, in any calculation.
REMARKS: HTSS igniters can be ordered in size increments of 0.1 metre lengths, from 0.5 to 3.0 metres.
The short tip is used on the shortest rods of length L=0.5, 0.6 and 0.7 only.
All rods 0.8 m long and longer are equipped with the long tip P/N HTR-TIP-L.
Table 1:
High Tension Rod, Spark & Sense, for safe area with junction box, replaceable tip and separate 5 m HV cable
Part No
Description
HTSS-0.5-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 0.5 m ins. length (0.65 mtr ins. to spark point), with j. box, 5 m cable
HTSS-1.0-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 1.0 m ins. length (1.15 mtr ins. to spark point), with j. box, 5 m cable
HTSS-1.5-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 1.5 m ins. length (1.65 mtr ins. to spark point), with j. box, 5 m cable
HTSS-2.0-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 2.0 m ins. length (2.15 mtr ins. to spark point), with j. box, 5 m cable
HTSS-2.5-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 2.5 m ins. length (2.65 mtr ins. to spark point), with j. box, 5 m cable
HTSS-3.0-J
HT Rod, S&S, for SP-32, SP-48 gas pilots of 3.0 m ins. length (3.15 mtr ins. to spark point), with j. box, 5 m cable
Table 2:
High Tension Rod, Spark & Sense, for hazardous Zone 1 with replaceable tip and integrated 5 m HV cable
Part No
Description
HTSS-0.5-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 0.5 m ins. length (0.65 mtr ins. to spark point)
, 5 m integrated cable
HTSS-1.0-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 1.0 m ins. length (1.15 mtr ins. to spark point)
, 5 m integrated cable
HTSS-1.5-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 1.5 m ins. length (1.65 mtr ins. to spark point)
, 5 m integrated cable
HTSS-2.0-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 2.0 m ins. length (2.15 mtr ins. to spark point)
, 5 m integrated cable
HTSS-2.5-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 2.5 m ins. length (2.65 mtr ins. to spark point)
, 5 m integrated cable
HTSS-3.0-CEX
HT Rod, S&S, for
SP-32, SP-48 gas pilots
of 3.0 m ins. length (3.15 mtr ins. to spark point)
, 5 m integrated cable