Fireye MB485ETH-CG Installation And Operation Manual Download Page 66

Page: 66 / 99

Appendix D

Device Mapping

Check the specific gateway start-up guide for the supported protocols for the gateway in use. The protocols

listed below may not apply to the gateway.

NOTE: For the headings below “BACnet” references both BACnet/IP and BACnet MS/TP.
NOTE: All Modbus TCP/IP registers are the same as the Modbus RTU registers for the serial

device. If this point list is needed, contact technical support. The Modbus TCP/IP node

address of the device is also the same as the Modbus RTU node address.\

NOTE: The profiles listed in the headings below map to BACnet/IP, BACnet MS/TP, Modbus

TCP/IP, EtherNet/IP and LonWorks.

NOTE: For the EtherNet/IP points listed in the tables below, the “EIP Tag Name” is for explicit

messaging while the “EIP Class”, “EIP Attribute”, “EIP Address” and “EIP Offset” are for

implicit messaging.

Summary of Contents for MB485ETH-CG




































































































Search results

Summary of Contents for MB485ETH-CG

Reviews:

Related manuals for MB485ETH-CG

Brands by name

Popular brands

Fireye MB485ETH-CG, Installation And Operation Manual

Search results

Summary of Contents for MB485ETH-CG

Reviews:

Related manuals for MB485ETH-CG

Brands by name

Popular brands