26
© 2020 Carrier
8.2.3
Wi-Fi Client Settings
To change the Wi-Fi client settings, follow these instructions:
•
Set the Wi-Fi Status to ENABLED for the MB485ETH-CG to communicate with other devices via
Wi-Fi.
•
Enter the Wi-Fi SSID and Wi-Fi Password for the local wireless network.
•
Enable DHCP to automatically assign all Wi-Fi Client network settings or manually modify the
setting using the fields immediately below (IP Address, Network, etc.).
NOTE: If connected to a router, set the IP gateway to the same IP Address as the router.
•
Click Update Wi-Fi Settings, then click on System Restart to restart the gateway and activate Wi-Fi
Client settings.
•
Go to Common settings (
) to set the Primary Connection to Wi-Fi Client.
Figure 24: Wi-Fi Client Network Settings
