58
© 2020 Carrier
Appendix B.6
Change User Management Settings
•
From the FS-GUI page, click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
NOTE: If the passwords are lost, the unit can be reset to factory settings to reinstate the default
unique password on the label. For ProtoNode, ProtoCessor or ProtoCarrier recovery
MB485ETH-CG Recovery Instructions document
. For ProtoNode
FPC-N54 or MB485ETH-CG recovery instructions, see the
. If the default unique password is lost, then the unit must be mailed
back to the factory.
NOTE: Any changes will require a MB485ETH-CG reboot to take effect.
Appendix B.6.1
User Management
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify and view any settings on the MB485ETH-CG.
Operator
– Can modify and view any data in the MB485ETH-CG array(s).
Viewer
– Can only view settings/readings on the MB485ETH-CG.
Figure 58: FS-GUI User Management