Fireye BurnerLogiX BLL510, Manual

Page: 12 / 80

12
®
The location should be free from excessive vibration and within the ambient temperature rating.
FIGURE 2.
WIRING BASE CONNECTIONS (shown for 120 VAC)
UL does not apply to 230 VAC operations
Terminal No.
60-2852-1
60-2854-1
Wire Color
60-2850-1
Type Description Rating
L1 (Hot) Black Line voltage supply 120 VAC (+10%, -15%), 50/60 Hz
L2 (Neutral) White Line voltage common
EARTH Green Ground
S1 Red/Wht Scanner Input 300 VAC, 3 mA (UV models)
15 VDC (IR models)
S2 Blu/Wht Scanner Input 300 VAC, 3 mA (UV models)
0 VDC (IR models)
A Red Output Alarm 120 VAC, 1 A pilot duty
M Brown Output Combustion Blower 120 VAC, 9.8 FLA, 58.8 LRA
3 Yellow Input Operating Control 120 VAC, 1 mA
13 Orange Input Fuel Valve End Switch,
Pre-Ignition Interlock 120 VAC, 1 mA
P Gray Input Running Interlock 120 VAC, 1 mA
D Wht/Brn Input Low Fire Start Switch 120 VAC, 1 mA
8 Wht/Gry Input Open Damper Proving Switch 120 VAC, 1 mA
W Wht/Orn Output Delayed Main Valve See Load Ratings
5 LT Blue Output Ignition / Pilot Valve See Load Ratings
6 Tan Output Pilot Valve See Load Ratings
7 Violet Output Main Fuel Valve See Load Ratings
16 DK Blue Input Lag 1 Input See description for
alternate uses
21 Pink Input Lag 2 Input
LOW VOLTAGE INPUT/OUTPUT
12 Wht/Yel Output Modulator Drive Positive 4-20mA Output
10 Wht/Red Output Modulator Drive Common
X Wht/Blue Output Temp/Pressure Source Voltage 28 vdc Nominal
11 Wht/Grn Input Temp/Pressure #1 (PCV) 4-20mA Input, Primary Control Variable
22 Wht/Vio Input Temp/Pressure #2 (AUX 1) 4-20mA Input
23 Brn/Wht Input Temp/Pressure #3(AUX 2) 4-20mA Input