Firepower TIG 200 AC/DC, Operating Manual

Page: 27 / 80

INTRODUCTION FIREPOWER TIG 200 AC/DC
Manual 0-5370 2-3
Introduction
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220
Welding Current (AMPS)
SAFE OPERATING REGION
(TIG & STICK)
0
0
10
20
30
40
60
70
50
80
100
90
Duty Cycle (PERCENTAGE)
GTAW (TIG)
SMAW (STICK)
A-11493
186 AC/DC
Figure 2-2: 200 AC/DC Duty Cycle
2.09 SPECIFICATIONS
Description Firepower 200 AC/DC INVERTER
Part Number 1442-0033
Power Source Weight 48.4lbs (22 kg)
Power Source Dimensions H15.75"xW9.45"xD18.7"
(H 400mm x W 240mm x D 475mm)
Cooling Fan Cooled (Runs Continually)
Welder Type Inverter Power Source
Applicable Standards / Approvals CSA E60974-1-00 / UL60974-1 / IEC 60974-1
Number of Phases 1
Nominal Supply Frequency 50/60Hz
Welding Current Range (STICK Mode) 5 - 160A (DC Stick) 10-170A (AC Stick)
Welding Current Range (TIG Mode) 5 - 200A (DC TIG) 30-200A (AC LIFT TIG)
10-200A (AC HF TIG)
Nominal Supply Voltage 208V 230V
Effective Input Current (I1eff) (See Note 1)
STICK
TIG
16.4A
16.5A 15.5A
14.1A
Maximum Input Current (I1max)
STICK
TIG
35.6A
35.4A 34.9A
32.4A
Single Phase Generator Requirement (See Note 2) 9.5KVA (7KW)
STICK (SMAW)
Welding Output, 40ºC, 10 min. 170A @ 15%, 26.8V
100A @ 60%, 24.0V
80A @ 100%, 23.2V
TIG (GTAW)
Welding Output, 40ºC, 10 min. 200A @ 20%, 18V
116A @ 60%, 14.6V
90A @ 100%, 13.6V
Open circuit voltage 70.3 VDC / 50VAC
Protection Class IP23S
Table 2-1: 200 AC/DC Specification