Firepower TIG 200 AC/DC, Operating Manual

Page: 46 / 80

FIREPOWER TIG 200 AC/DC INSTALLATION
3-18 Manual 0-5370
Installation
A-12703
NOTE: The additional switches/controls below are interchangeable with the installed control in the TIG torch.
ART# A-11587
Control module with
push button on/off
switch only.
Control module with
push button on/off switch
with roller potentiometer.
Control module with
roller potentiometer and
integrated on/off switch.
Additional On/Off Switch Cartridge in a Sealed Plastic Bag.
Additional On/Off Switch-Remote Amperage Control Cartridge in a Sealed Plastic Bag (NOTE: You will not be
able to view the pre-set amperage on the power source with this control, amperage will not be viewable until the
arc is initiated).
A-12704
1 x Accessory Kit containing 1 x Short Back Cap, 1 x Collet Body 1/8" (3.2mm),
1 x Collet Body 3/32" (2.4mm), 1 x Collet Body 1/16" (1.6mm), 1 x Collet 1/8" (3.2mm), 1 x Collet 3/32" (2.4mm),
1 x Collet 1/16" (1.6mm), 1 x Nozzle Alumina No5, 1 x Nozzle Alumina No6, 1 x Nozzle Alumina No7, 1 x Tungsten
Electrode 1/8" (3.2mm) Thoriated Type (red band), 1 x Tungsten Electrode 3/32" (2.4 mm) Thoriated Type (red
band) and 1 x Tungsten Electrode 1/16" (1.6mm) Thoriated Type (red band).