Finalizing the Installation
2 7
Travis Industries
9 3 5 0 8 1 0 3
1 5 1 0 0 2
?
If converting this unit to propane, do so now (see the instructions on page 40.
2
Install the log set and coals (if using the decorative fireback, install it prior to the log set - page 51).
AAAAA
AAAAA
AAAAA
AAAAA
Place the ember strips on
the grate as shown in this
illustration. The front
strip should hang half
way over the burner.
Grate
Place the log set on the
grate. Position the logs
so the rear corners rest
against the log stops.
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
Place the optional kibbles
in front of the firebox. Do
not place the kibbles directly
over the burner holes.
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
AAAAA
One Strip Approximately
7-1/2Ó by 1-1/2Ó
AAAA
AAAA
AAA
AAA
Two Strips Approximately
3Ó by 1-1/2Ó
Preparing the Glowing Embers:
The glowing embers comes in a single
strip. Stretch them as thin as possible
(nearly transparent) to form three strips
of the following sizes:
AAA
AAA
There may be extra material -
save it for future use.
AAA
AAA
AAA
AAA
AAA
AAA
AAA
Side View
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAAA
AAAAAAAA
AAAAAAAA
AAAAAAAA
AAAAAAAA
AAAAAAAA
Tuck the front of the ember strip down,
behind the burner with a screwdriver. Make
sure the mat of ember wool is not over the
burner holes. Tuck it behind the burner
tube if necessary.
Note how only a few
ÒwhiskersÓ are over
the burner holes.
