Operation
3 1
Travis Industries
9 3 5 0 8 1 1 6
0 3 1 0 0 0
Adjusting the Blower Speed (Optional)
The internal blower helps transfer
the heat from the fireplace into the
room. It will not turn on until the
fireplace is up to temperature
(approximately 10 minutes after
starting). See the illustration below
for instructions on adjusting the
blower speed.
BLOWER
CONTROL
LO
OFF
HI
Blower Knob
Turn the knob all the way counter-clockwise to turn
the blower off. One click clockwise turns the
blower to high speed. Turning the knob clockwise
from the high position decreases the speed of the
blower.
Normal Operating Sounds
Gas Control Valve
As the gas control valve is turned on
and off you will hear a dull clicking
sound. This is the valve opening up
and shutting down.
Blower Snap Disk
This part can produce a clicking sound as it
turns the blower on and off.
The appliance will creak with change of
temperature.
Pilot Flame
The pilot flame, which
remains on, makes a very
slight "whisper" sound.
Optional Blower
This heater uses a blower to push heated air into the room. You
will hear the sound of air movement that increases as the speed
is increased.
Extinction Pops
It is not unusual, especially on Propane (LP) appliances,
to experience a "pop" when the burner is shut off.
Normal Operating Odors
This appliance has several areas that reach high temperatures. Dust or other particles on these areas
may burn and create an odor. This is normal during start-up. You may notice the smell is more acute if
the appliance was left idle for a long period.
