Cursor keys
No functions are related to the
Up
,
Down
,
Right
, or
Left
keys.
ESC and ENTER keys
Table 20: ESC and ENTER key function in insert
password
Key
Function
ESC
Use to return to the previous
screen or to clear the entered
digits of a password.
ENTER
Use to accept and verify the
password.
If the password is incorrect or missing, an error
message will appear. See Figure 22.
Figure 22: Wrong password screen
PROGRAM screen
From the MAIN screen, press the
1
key to select the
PROGRAM screen. Enter the password. See Figure
23.
Figure 23: PROGRAM screen
In this phase, the keypad and keys have the
following functions:
Alphanumeric keypad
Table 21: Alphanumeric keypad function in
PROGRAM screen
Key
Function
1
Auto
: starts the auto-learning of the
loop devices and the RS485 network
devices (repeater only).
2
DC Dev
: starts the selection and
programming screen of the loop
devices.
3
SW Zone
: starts the programming
screen of the software zones.
4
Output
: starts the programming
screen of the Outputs.
5
Network
: starts the programming
screen of the RS485 network, FC500MFI
modules.
6
Map Device
: activates the On Demand
device mapping feature.
7
USB
: starts the programming screen
for the management of the USB
memory stick.
8
System
: starts the programming
screen of the system parameters.
9
Default
: forces a default setting
restore procedure.
0
L3 PWD
: starts the screen to insert the
L3 password (Installer code). See 0 Key-
insert modify password.
Cursor keys
No functions are related to the
Up
,
Down
,
Right
, or
Left
keys.
ESC and ENTER keys
Table 22: ESC and ENTER key function in
PROGRAM screen
Key
Function
ESC
Use to cancel the operation and
to return to the MAIN screen.
ENTER
No function
0 Key - insert modify password
On the PROGRAM screen, press the
0
key to modify
the Level 3 Installer password. The default password
FC503 and FC506 Addressable Fire Control Panels
41
Johnson Controls - CONFIDENTIAL
