
3
INSTALLATION
7
3-B: Installation in New Zealand and Australia
This appliance has been manufactured in compliance with AS1690
Domestic Oil Fired appliances Safe Design Code.
This appliance has a current Occupational Safety and Health (OSH)
and Environmental Risk Management Association (ERMA)
Clean Air Approval number of 1079/03
This appliance and flue system has been tested by CRL Laboratories in
New Zealand
( Certificate number 07-41180 )
and can be
installed to meet the requirements of AS1691-1985
Domestic Oil Fired Appliances Installation.
3.1 This includes suitability for zero clearance installation to
combustible surfaces.
Please ensure that this appliance and flue system is installed to comply with
manufacturers instructions and AS1691-1985 Domestic Oil fired
Appliances Installation.
Please ensure that the appliance is bolted to the floor for seismic restraint.
Firebird recommend the use of Firebird coaxial flue systems to achieve room
sealed operation. However, conventional flue systems are also suitable.
The installation of this appliance and fuel source will require a building consent
from your local council.
This appliance is tuned to run on diesel fuel.
This appliance must be installed by experienced personnel.
Failure to install correctly will invalidate the warranty.
The warranty does not cover consequential damages.
If you have any queries with this product,
please consult the distributor in New Zealand
Central Heating New Zealand Ltd
11 Parkhouse Road
Christchurch
0064 3357 1233
www.centralheating.co.nz
Summary of Contents for HEAT PAC 120/150
