Fimer TT165 AC/DC, Instruction Manual

Page: 16 / 32

6
1. GENERAL INFORMATION
Models TT165 AC/DC and TT205 AC/DC are
portable, single-phase Welders based on
INVERTER technology. They are extremely
compact, versatile units and can be used in all
circumstances where a compact design needs
to be flanked by high performance. They can
be used for TIG (AC or DC) or MMA welding.
Lift or HF arcs can be generated.
Thanks to the advanced microprocessor
techniques, reliable high-quality results (that
could previously only be provided by bigger,
more expensive welders) can be achieved on
a wide variety of materials, such as steel, iron,
wrought iron, copper, nickel and alloys.
WARNING: The unit should only be used for
the operations described in this manual. It
should not be used to melt frozen pipes.
Manual consultation suggestions: The
most frequently consulted diagrams (Figs.1
and 2) are grouped together on page 6.
2. DESCRIPTION OF WELDER
Warning: The unit should only be used for
operations described in this manual.
It should not be used to melt frozan pipes.
FIGURE 1:
1. Frequency Knob
TIG AC welding:
The AC output current frequency can be set
using this Knob.
MMA + TIG DC welding : Not used
2. Frequency Confirmation:
TIG AC Mode : This lights up for app. 4
seconds for each setting selected using
Knob 1.
MMA and TIG DC welding: Not used
LEDs 3 to 10: Welding Setting Indicators
Lit when a welding parameter has been
changed using button 14.
Adjust the settings using Knob 25. The
new setting will be shown on the
display panel (13).
Memorise the new setting pressing button
14 (or wait 1.5 seconds).
Indicator details:
3. Setting Indicator: Pre-Gas Indicator:
Lit when the pre-gas duration has been set
using button 14.
4. Setting Indicator: Initial Current Indicator (Is):
Lit when the initial current value has been
set set using button 14.
3 4 5 6 7 8 9 10
11
12
14
20
30
31
32
24
25
26
33
27
28
29
1
2
13
38
37 36 35
34
Fig.1
43
42
39
41
40
Fig.2
15
16
17
18
19
21
22
23