Fimap MAGNA PLUS, Use And Maintenance Manual

Page: 29 / 48

ALARM
NUMBER
DESCRIPTION
LOCK
MANUAL
AUT
OMA
TIC
AL_1: General Memory error X
AL_2: General Key fault X
AL_3: General Undervoltage X
AL_4: General Overvoltage X
AL_5: General Batt. connection X
AL_6: General Dashboard communication X
AL_7: General FFM communication X
AL_8: General Internal communication 1 X
AL_9: General Internal communication 2 X
AL_10: General Enter tag X
AL_11: General Invalid tag X
AL_12: General Update in progress… X
AL_13: General Switch-off X
AL_14: General Recovery tank full X
AL_15: General Brake fluid Reserve X
AL_41: Function Overtemperature X
AL_42: Function Power board damaged X
AL_43: Function Main fuse faulty X
AL_44: Function Main contactor faulty X
AL_45: Function Main contactor faulty - CC X
AL_46: Function Overcurrent - brush outputs 1-2-3 X
AL_47: Function Overcurrent - vacuum cleaner outputs 1-2 X
AL_48: Function Overcurrent - water pump outputs X
AL_49: Function Amperometric - brush output 1 X
AL_50: Function Amperometric - brush output 2 X
AL_51: Function Amperometric - brush output 3 X
ALARM
NUMBER
DESCRIPTION
LOCK
MANUAL
AUT
OMA
TIC
AL_52: Function Amperometric - vacuum cleaner output 1 X
AL_53: Function Amperometric - vacuum cleaner output 2 X
AL_60: Function Timeout Actuator 1 X
AL_61: Function Amperometric Actuator 1 X
AL_62: Function Overcurrent Actuator 1 X
AL_63: Function Incorrect limit switches - actuator 1 X
AL_64: Function Timeout Actuator 2 X
AL_65: Function Amperometric Actuator 2 X
AL_66: Function Overcurrent Actuator 2 X
AL_67: Function Incorrect limit switches - actuator 2 X
AL_68: Function Timeout Actuator 3 X
AL_69: Function Amperometric Actuator 3 X
AL_70: Traction Overcurrent Actuator 3 X
AL_71: Traction Incorrect limit switches - actuator 3 X
AL_80: Traction Overtemperature X
AL_81: Traction Power board damaged X
AL_82: Traction Main fuse faulty X
AL_83: Traction Main contactor faulty X
AL_84: Traction Main contactor faulty - CC X
AL_85: Traction Overcurrent - traction output X
AL_86: Traction Amperometric - traction output X
AL_87: Traction Motor reading X
AL_88: Traction Electric brake fault X
AL_89: Traction Pedal fault X
AL_90: Traction Pedal pressed X
AL_91: Traction Encoder fault X
ALARM SCREEN
When an error occurs the symbol (1) is displayed in the information field ( Fig. 1 ), it remains visible until
the error is resolved. The “ERROR” window will also be displayed in superimposition ( Fig.2 ), in it are
described the number of the alarm, the group it belongs to and a brief description. When an error
occurs, do as follows:
1. Stop the machine and press the button (2) ( Fig.2 ).
2. If the error persists, switch off the machine, wait for at least ten seconds and switch on the machine.
N.B.: to close the error screen press the button (3) ( Fig.2 ).
3. If the error persists contact the nearest service centre.
N.B.:
the symbol (1) (
Fig.1
) remains visible until the error is resolved.
The alarms can be divided into the following groups:
• Lockout alarms: these can only be reset by switching off the machine; they may entail the immediate stopping of the entire machine or a part
thereof.
• Manual reset alarms: these can be reset manually via the user interface; they may entail the immediate stopping of the entire machine or a
part thereof.
• Automatic reset alarms: these are reset automatically once the error has been resolved; they may entail the immediate stopping of the entire
machine or part thereof.
OFFICE
0000.00 100%
ECO mode
0000.00 100%
Italiano
English
Spanish
French
German
Allarme 1
Gruppo
Descrizione
Reset
?
1
2
1
2
3
4
29