PREPARATION OF THE APPLIANCE
6.
COMPONENTS OF THE VACUUM HEAD
The components of the vacuum head assembly are as follows:
1.
Vacuum cap release lever.
2.
Main switch.
3.
Handle bar for vacuum head lifting.
4.
Lever for noise level and energy saving adjustment (only for FV15).
5.
Power cable.
6.
Power cable locking bracket.
7.
Power cable locking bracket locking lever.
8.
Cartridge filter locking mesh.
9.
Exhaust air filter.
10.
Power cable winding bracket (only for FV15).
11.
Vacuum head coupling lever.
12.
Fabric bag filter.
13.
Sponge filter locking mesh.
14.
Vacuum motor filter.
7.
APPLIANCE SAFETY
The stages for making the appliance safe, and thereby allowing all the operations to be carried out in
complete safety, are as follows:
1.
Make sure that the collection tank is empty, and if not, empty it (read the section “
EMPTYING THE
COLLECTION TANK
”).
WARNING: The place this operation is carried out should comply with current
environmental protection regulations.
Page 8
