WEEKLY MAINTENANCE
To remove the vacuum motor sponge filter, proceed as follows:
6.
Remove the mesh (4) and the exhaust air filter (5).
7.
Clean it with detergent and warm water.
8.
Repeat the operations in reverse to reassemble.
WARNING: Check the state of wear of the sponge filter, if the filter surface area is
blocked or has been damaged, replace according to the section “
REPLACING THE
EXHAUST AIR FILTER
”.
To remove the vacuum motor cartridge filter, proceed as follows:
9.
Remove the mesh (4) and the exhaust air filter (5).
10.
Clean the cartridge filter with an air jet from a distance of at least 20 cm.
11.
Repeat the operations in reverse to reassemble.
WARNING: Check the state of wear of the vacuum motor filter, if the filter surface area
is blocked or has been damaged, replace according to the section “
REPLACING THE
EXHAUST AIR FILTER
”.
WARNING: It is advisable to pay attention to the direction of filtration, the mesh in the
filter should be positioned opposite the vacuum motor.
Page 20
