Fimap BMg Sanitizer, Use And Maintenance Manual

Page: 9 / 28

9
• Lift the machine with equipment that can sustain the weight to be lifted.
• Never tamper with the machine's protection devices for any reason; always follow the
supplied routine maintenance instructions scrupulously.
• If any parts need to be replaced, always request ORIGINAL spare parts from an
authorized Dealer or Retailer.
• In order to ensure the machine's safety and proper functionality, always have the
scheduled maintenance interventions (specified in the appropriate section of this
Manual) performed by authorized personnel or by an authorized Service Centre.
• Do not wash the machine with direct jets of water, pressurised water or with corrosive
substances, and do not wet it in the vicinity of electrical components.
• Have the machine checked by an authorised technical assistance centre every year.
• When disposing of consumable materials, observe the laws and regulations in force.
Once the machine has reached the end of its service life, the materials contained
within it must be disposed of in an appropriate manner, keeping in mind that the
machine itself has been built using fully recyclable materials.
• All repairs must be carried out by qualified personnel.
• Do not physically change the design characteristics of the machine.
• Use spare parts provided by authorised service centres.
• Wear personal protective equipment as required and as suggested in the manual.
TRANSPORT
WARNING:
• Drain both tanks before transport.
• Use a ramp, a truck or a trailer that can support the weight of the machine and the
operator.
• The ramp for placing the machine on the transport vehicle should have such a slope
that the machine does not get damaged.
• Secure the device according to the directives in force in the country of use, so that it
cannot slide or tip over when being transported.
• In versions with electric traction, make sure the electric brake is correctly engaged
after loading the machine onto the transport vehicle.
ATTENTION:
• Use caution when moving the machine under temperatures below freezing. The water
contained in the water recovery tank or in the pipes could freeze, and could seriously
damage the machine itself.