Fimap BMg Sanitizer, Use And Maintenance Manual

Page: 14 / 28

SERIAL NUMBER PLATE
11
10
9
8
7
6
1
2
3
4
5
The serial number plate is located at the rear of the steering column, and indicates the
machine's general characteristics, including its serial number. The serial number is a very
important piece of information and should always be provided together with any request for
assistance or when purchasing spare parts. The serial number plate contains the following:
1) The weight of the batteries that power the machine (expressed in kg). See paragraph “TYPE
OF BATTERY TO BE USED” on page 17.
2) The IP protection rating of the machine.
3) The gross weight of the machine (expressed in kg).
4) The machine ID code.
5) The machine serial number.
6) The machine ID name.
7) The nominal power consumed by the machine (expressed in W).
8) The maximum slope that the appliance can handle during work activities (expressed as %).
9) The year of machine manufacture.
10) The nominal voltage of the machine (expressed in V).
11) The commercial name of the machine, and the manufacturer's address.
TECHNICAL DATA
TECHNICAL DATA
U/M
[KMS]
BMG
SANITIZER
Rated machine power kW 0,65
Minimum transport width mm 630
Traction motor electrical properties (voltage - power) V / W 24 - 300
Compressor electrical properties (voltage - power) V / W 24 - 350
Maximum slope during work with GVW % 17
Maximum speed during transport km/h 5,5
Recommended speed during work km/h 2,8
Maximum solution tank capacity l 51
Minimum inversion footprint mm 1830
Machine dimensions (length - height - width) mm
1285
1189
630
Battery compartment dimensions (length - height - width) mm
350
190
310
Machine weight when empty kg 128
Transported machine weight kg 210
GVW kg 336
Sound pressure level in operator seat [ISO 11201] (L
pA
) dB <70
Uncertainty K
pA
dB 1,5
Hand-arm vibrations [IEC 60335-2-72; IEC 62885-9; ISO 5349-1] m/s
2
<2,5
Whole body vibrations [IEC 60335-2-72; IEC 62885-9; ISO 2631-1] m/s
2
0,65
Vibration measurement uncertainty 4%
SYMBOLS USED ON THE MACHINE
Filter body position symbol:
Applied to the front of the machine to indicate the position of the solution tank filter.
R
Reverse gear activation/deactivation lever position symbol:
Applied to the reverse gear activation/deactivation lever.
SYMBOLS AND LABELS USED ON THE MACHINE
14