Fimap BMg Sanitizer, Use And Maintenance Manual

Page: 6 / 28

6
• Keep the battery charger's cable at a safe distance from any hot surfaces.
• Never smoke in the machine's vicinity while the batteries are charging.
• Carefully read the user manual of the battery charger you want to use before
recharging.
USING THE MACHINE
DANGER:
• In case of danger, act promptly by pressing the emergency button (if present) or
disconnecting the battery connector from the electrical system connector.
• If the machine is used in dangerous areas (e.g. petrol stations), the relative safety
standards must be observed. It is forbidden to use the machine in environments with
a potentially explosive atmosphere.
WARNING:
• The machine must be exclusively used by authorised, trained personnel.
• Always use the machine in compliance with its intended use, taking into consideration
local conditions and looking out for the presence of others when working, especially
children.
• This machine should not be used by persons (including children) with physical,
sensorial or mental impairments and by persons with little experience and/or little
knowledge of the machine itself.
• Do not use the machine on surfaces with a slope greater than the one indicated on
the serial number plate.
• The machine cannot be used on uneven or bumpy floors. Do not use the machine on
slopes.
• In the event of a fire, use a powder extinguisher. Do not use water.
• Adapt the speed to the adhesion conditions.
• Do not use the machine if you do not have the requisite knowledge or authorisation.
• Do not use the machine if these safety warnings and the machine user manual have
not been read and understood.
• Do not use the machine under the influence of alcohol or drugs.
• Do not use the machine when using a mobile phone or other types of electronic
devices.
• Do not use the machine if it is not working correctly.
• Do not use the machine in areas where there are inflammable vapours or liquids or
combustible powders.
• Do not use the machine in areas where it is too dark to see the controls or operate
the machine safely, unless the work lights or the front headlights are on (if present).