8. Zone button
N.B.:
if it is necessary to change the program being used while working, press the Zone button (8) (see “
9. Text indicator.
N.B.:
in the text indicator (9) it is possible to see that the zone program has been selected or whether you are in transport mode if there is
the word “DRIVE”.
N.B.:
If it is necessary to turn on the low beam headlights while working, see “
WORKING HEADLIGHTS (PLUS VERSION)
”.
ATTENTION: never switch off the machine while the squeegee and/or brush head is in contact with the floor
DRYING
By selecting the "DRYING” program, the command display screen will
appear as in the adjacent figure.
N.B.:
with this working program pressure on the drive pedal only
brings the squeegee to the work position (in contact with the
floor), while the brush head remains in the rest position (raised
from the floor). When the drive pedal is pressed both the suction
motor and the traction motor are powered.
N.B.:
In the DS selector, the drying program symbol (C) is green
(see “
”).
N.B.:
the grey symbols show working programs that are not
active. the green symbols show working programs that are active.
N.B.:
when the drive pedal is released the suction motor will stop with the respective delay. After the “Reset Delay” time all the squeegee
support is taken to the rest position (raised off the floor). by pressing the forward movement pedal it will start working with the same
program and with the same parameters that were set before it stopped.
N.B.:
if you reverse with this program active, the squeegee support is put in the rest position (raised off the floor) and the suction motor is
switched off with the relative delay.
The icons that may be visible on the control panel display are:
1. FFM symbol, if visible it shows that the system is operating.
2. FSS symbol, if visible it shows that the system is operating.
3. Working lights symbol, if visible it shows that the working lights are on.
4. General alarm symbol.
ATTENTION:
if this is visible, stop the machine; to continue working, see “
”.
5. Eco-Mode button.
N.B.:
if the Eco Mode button (5) is pressed, the working program currently in use will be activated in Eco Mode; to deactivate Eco Mode,
6. Menu button.
7. Rear view camera button.
N.B.:
when the rear view camera button (7) is pressed (if present), the camera located at the back of the machine will be activated, see
“
REAR VIDEO CAMERA (PLUS VERSION, OPTIONAL)
8. Text indicator.
N.B.:
the text indicator (8) shows which zone program has been selected, or whether the machine is in transport mode if the word
“DRIVE” is visible.
OFFICE
0000.00
100%
1
4
2
3
6
8
5
7
25
