DETERGENT SOLUTION RECYCLING SYSTEM (FLR VERSIONS, PLUS VERSIONS)
Upon request the machine can be fitted with a system that allows the detergent solution to be recycled
so that productivity can be increased, since the number of stops needed to empty and fill the tanks is
reduced. As a result less water and detergent are used, thereby making the operator safer, who comes
into contact with the chemical products less frequently, and the operation is more environmentally
friendly.
To start it, proceed as follows.
1. With the machine on, press the menu button (1) on the working screen (
Fig.1
).
2. Press the FLR system activation/deactivation button (2) (
Fig.2
).
N.B.:
if the symbol (2) is grey the FLR system is not active, if the symbol (2) is green the FLR
system is active.
N.B.:
to quit the menu screen, wait a short time without pressing anything, or else press on any point of the display (except one of the
displayed buttons).
N.B.:
the FLR system activates when the electric pump in the machine's water system starts.
N.B.:
if the FLR system is activated, the relative symbol (3) is displayed in the working screen.
N.B.:
if you want to deactivate the FLR system press button (2) again.
N.B.:
to return to the working screen press on any point of the screen, except the edges of the display or else wait three seconds without
touching anything.
3. The machine will continue working until there is no more any detergent solution in both tanks.
OFFICE
0000.00
100%
ECO mode
0000.00
100%
1
2
2
1
3
WORKING HEADLIGHTS (PLUS VERSION)
The machine is equipped with front and rear working lights. To start them, proceed as follows.
1. With the machine on, press the menu button (1) on the working screen (
Fig.1
).
2. Press the working lights activation - deactivation button (2) (
Fig.2
).
N.B.:
if the symbol (2) is grey the working lights are not active, if the symbol (2) is green the working
lights are active.
N.B.:
to quit the menu screen, wait a short time without pressing anything, or else press on any point
of the display (except one of the displayed buttons).
N.B.:
the sidelights come on when the machine is started.
N.B.:
if the side lights are activated the relative symbol (3) is displayed.
N.B.:
if you want to switch off the lights press the button (2).
N.B.:
to return to the working screen press on any point of the screen, except the edges of the display or else wait three seconds without
touching anything.
OFFICE
0000.00
100%
ECO mode
0000.00
100%
1
2
2
1
3
AUTOMATIC REQUEST FOR TECHNICAL ASSISTANCE (FFM VERSIONS)
The machine has an automatic service for activating an urgent technical assistance request. To activate this function,
the operator has to press the button (2) under the hatch (1) bearing the symbol “SOS” (
Fig. 1
).
N.B.:
in order to activate this urgent technical assistance request the machine needs to be equipped with the
FIMAP FLEET MANAGEMENT kit.
N.B.:
in order to send a technical assistance request the machine needs to be on and should be in a zone with
data traffic coverage.
1
1
2
32
