N.B.:
To deactivate the function, move the lever (3) again, the symbol (4) in the control display panel will disappear.
3
1
1
4
2
2
3
EXTRA BRUSH HEAD BRUSH PRESSURE (PLUS VERSION)
This machine is capable of increasing the pressure exerted upon the brushes during the work cycle. This can be done in the following manner:
1.
Check that the brush head body is in contact with the floor, if not select in the DS selector the programs “SCRUBBING WITH DRYING” OR
“SCRUBBING WITHOUT DRYING” (
Fig.1
).
2. Engage the “EXTRA-PRESSURE ACTIVATION/DEACTIVATION” lever (1) underneath the steering wheel (
Fig.2
).
3. Press the drive pedal (2) (
Fig.3
) to initiate the machine's working cycle.
N.B.:
as soon as the lever (1) is shifted the control display will show the “POWER” screen (
Fig.4
), in the middle of the screen there is a
graphic symbol (3) and a numeric symbol (4), these represent a countdown.
N.B.:
when the extra-pressure function is activated, the countdown starts. During this time, a pressure stronger than the standard
pressure is exerted on the brush head body.
N.B.:
at the end of the countdown you return to the working screen that was previously used and the pressure on the brush head goes
back to standard.
2
3
2
3
Back
0000.00
100%
POWER
0000.00
100%
1
4
DETERGENT SOLUTION RECYCLING SYSTEM (FLR PRO VERSIONS)
Upon request the machine can be fitted with a system that allows the detergent solution to be
recycled so that productivity can be increased, since the number of stops needed to empty and fill
the tanks is reduced.
As a result less water and detergent are used, thereby making the operator safer, who comes
into contact with the chemical products less frequently, and the operation is more environmentally
friendly.
To start it, proceed as follows.
1. With the machine running, press the FLR SYSTEM ACTIVATION/DEACTIVATION button (1)
(Fig.1).
N.B.:
if the LED on the button (1) is on, the FLR system is active; if the LED is off, the FLR
system is deactivated.
N.B.:
the FLR system activates when the electric pump in the machine's water system starts.
N.B.:
if you want to deactivate the FLR system press button (1) again.
2. The machine will continue working until there is no more any detergent solution in both tanks.
N.B.:
if the detergent solution in both tanks should run out, the symbol (2) "FLR SYSTEM NOT WORKING" will appear in the control
display (
Fig.2
). Deactivate the function using the button (1) and fill the solution tank with a new detergent solution.
2
2
1
1
31
