HANDLING THE PACKAGED MACHINE
The machine's overall weight including packaging is 205Kg.
N.B.: it is recommended that all the packaging components be kept for any future
machine transportation.
DANGER: Move the packaged product with handling equipment that complies with
legal requirements regarding size and mass of the packaging.
A
1385mm
B
750mm
C
1460mm
HOW TO UNPACK THE MACHINE
The machine is shipped in specific packaging. To remove it, proceed as follows:
1.
Place the lower part of the outer packaging in contact with the floor.
N.B.:
use the pictograms printed on the box as a reference.
2. Remove the outer package.
WARNING:
the machine is contained in specific packaging materials, whose elements (plastic bags, staples, etc.) can pose potential
hazards, and must not be left within reach of children, disabled persons, etc.
CAUTION:
these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal
objects.
3. Insert a ramp in the rear part of the machine.
ATTENTION:
the ramp gradient must not be such as to cause damage to the machine as it comes down.
4.
The machine is fixed to the pallet with wedges (1) that block the wheels (
Fig.1
). Remove these wedges.
5. Move to the right rear part of the machine and check that the electro-brake, present in the traction gear motor, is not engaged. Turn the lever
(2) clockwise (
Fig.2
).
6. Drive the machine down the ramp.
ATTENTION:
during this operation, check there are no people or objects near the machine.
2
1
1
2
HOW TO MOVE THE MACHINE
To transport the machine safely, proceed as follows:
DANGER:
before starting any task, make sure the current regulations concerning the safe transport of dangerous substances are
scrupulously observed.
1. Check to make sure that the solution tank and the recovery tank are empty. If this is not the case, empty them (see the sections titled
“
”).
2. Sit on the driver’s seat.
3. Insert the key (1) into the main switch on the control panel. Set the main switch to "I" (
Fig.1
).
4. Lift the brush head body, and for PRO versions, press the “BRUSH HEAD CONTROL” button (2) on the control panel (
Fig.2
). For PLUS
versions, using the DS selector on the control display (
Fig.3
), select the “transfer ” program (3) (see “
”).
N.B.:
As soon as the button (2) on the control panel is pressed, the green LED (4) (“BRUSH HEAD BODY WORK POSITION”) will switch
off (
Fig.2
).
5. For PRO versions, lift the squeegee body and press the “SQUEEGEE CONTROL” button (5) on the control panel (
Fig.2
).
N.B.:
as soon as the button (5) on the control panel is pressed, the green LED (6) (“SQUEEGEE BODY WORK POSITION”) will switch off
(
Fig.2
).
6. Press the drive pedal (7) (
Fig.4
) to begin moving the machine.
7. Use a ramp to move the machine up onto the transport vehicle.
CAUTION:
During this operation, check there are no people or objects near the machine.
13
