FT-50 Fill Level Inspector Service Manual
5-42
Diagnostic Error Codes Listing
The following list contains the FT-50 error codes. Depending upon
your machine type, some of these errors may not apply to your
FT-50. For complete error descriptions, see Chapter 8.
0
No Diagnostic Error
* 2
Rejector Status Is Off
5
Consecutive Reject Queue Error
6
Consecutive Reject Timing Error-Missed Encoder Pulse
8
EEPROM Cannot Be Erased. Check S11 Or Replace U29
9
Write To Eeprom Unsuccessful. Check S11 Or Replace U29
10
Fill Level Detection Error-Exceeded Consecutive Reject Limit
11
Missing Lid Detection Error-Exceeded Consecutive Reject Limit
12
Bulged End Detection Error-Exceeded Consecutive Reject Limit
13
Gamma Counts Below Reject Threshold Error
14
Gamma Detector Error
15
Missing Lid Sensor Error
16
Trigger Beam Error
17
Encoder Sensor Error
18
Slat Rejector Backup Sensor Is Blocked
22
Encoder Pulse Missed
23
Extra Encoder Pulse Detected
24
High Resolution Encoder Minimum Distance Error
25
High Resolution Encoder Minimum Time Error
* 27
High Resolution Encoder Failure
* 33
Down Can Detection Error-Exceeded Consecutive Reject Limit
* 34
Down Can Detection Error-False Trigger
* 46
Consecutive External Reject Alarm
47
Encoder Resolution Too Low
* 48
AC Input Voltage Low, Brownout Detected
* 49
User Defaults Closed For One Or More Settings
50
System Defaults Loaded For One Or More Settings
51
Container Passed With No Encoder Pulses
52
Container Less Than 10 Ms
53
Reject Watchdog Detected Queue Error
Industrial Dynamics Company, Ltd. Document 40255-0600
