Chapter 4 – Operation
Remote control
Truelight SDI User Guide
21
The
Input Selection
buttons are used to set the input SDI format and the function of the
IN A and IN B connectors (see the connection diagram on
page 6
of this guide).
The following options are available:
The
Output Selection
buttons set the output SDI format and the function of the ‘OUT A’
and ‘OUT B’ links.
The following options are available:
Option
Description
4:2:2 YCrCb on A
The input is taken from the ‘IN A’ connector; the input mode is set to 4:2:2 YCrCb
(the ‘IN B’ connector is ignored).
4:2:2 YCrCb on B
The input is taken from the ‘IN B’ connector; the input mode is set to 4:2:2 YCrCb
(the ‘IN A’ connector is ignored).
4:4:4 YCrCb
Both ‘IN A’ and ‘IN B’ connectors are used as input (dual link HD-SDI); the input mode is
set to 4:4:4 YCrCb.
4:4:4 RGB
Both ‘IN A’ and ‘IN B’ connectors are used as input (dual link HD-SDI); the input mode is
set to 4:4:4 RGB.
Option
Description
4:2:2 YCrCb
The output mode is set to 4:2:2 YCrCb and the output signal is fed to both the ‘OUT A’
and ‘OUT B’ connectors (same signal on each).
4:4:4 YCrCb
The output mode is set to 4:4:4 YCrCb; the output is fed via both OUT connectors as a
dual link SDI signal.
4:4:4 RGB
The output mode is set to 4:4:4 RGB; the output is fed via both OUT connectors as a dual
link SDI signal.
