Chapter 4 – Operation
Front panel
Truelight SDI User Guide
17
4 - Operation
Front panel
On the front panel there are five buttons numbered 1 to 4 and 0. These buttons are pre-
configured to provide selection of specific cubes and control over the bypass and legalizer
functions of the unit.
Selecting cubes
To select cubes 1 to 4, press buttons 1 to 4. Press these buttons a second time to select
cubes 9 to 12. In a typical configuration cubes 9 to 12 are loaded with gamut alarm versions
of cubes 1 to 4, enabling a simple toggle between gamut alarm on and off states for the
first four cubes (see
Creating a gamut alarm cube
on page 12 for details).
To select cubes 5 to 7, hold down button 0 and press buttons 1 to 3; cubes 13 to 15 are
selected by a second press of button 0 + 1 to 3. Note that cube 8 cannot be selected
directly from the buttons on the front of the unit—it can, however be selected using the
remote control Java applet (see
Remote control
on page 19 for details).
The cube selections are summarised in the following table.
Figure 4-1:
Truelight SDI front panel
