Fike TWINFLEX SRP, Engineering And Commissioning Manual

Page: 19 / 30

TWINFLEX
®
SRP Remote Status Indicator Engineering and Commissioning Manual
19
General Operation of Remote Status Indicator
RSI Front Panel
LED Indication
The LED operation of the RSI is described below. The LED indication can also be confirmed by
checking the message displayed in the RSI information window or by accessing the relevant Current
Event from the RSI menu. The SRP Control Panel logs may also be checked.
Description Colour State Reason
FIRE
– 1 LED (left)
Red
Flashing The Control Panel is in the Fire 1 state. Other indicators will show the origin.
Continuous The Control Panel is in the fire state and sounders have been silenced.
FIRE
– 2 LED (right)
Red
Flashing The Control Panel is in the Fire 2 state. Other indicators will show the origin.
Continuous The Control Panel is in the Fire 2 state and sounders have been silenced.
RELEASE IMMINENT
Yellow Flashing The Control Panel has reached a pre-release state and the counter is
counting down to release.
Continuous The Control Panel has reached a pre-release state and the counter is
counting down to release and sounders have been silenced.
RELEASED Yellow Flashing The Control Panel has reached the release state and release outputs have
been activated.
Continuous The Control Panel has reached the release state and release outputs have
been activated and sounders have been silenced.
HOLD ACTIVE Yellow Flashing A hold activation has been received and the panel is currently in a hold
mode. System operation will continue once the hold condition is cleared.
Continuous This LED goes continuous on a silence.
SYSTEM
POWER Green Continuous This indicates that power is being supplied to the RSI panel.
FAULT Yellow Flashing The Control Panel is in the fault state. Display will show details.
Continuous A Fault condition exists and the Silence Buzzer button has been activated
DISABLED Yellow Flashing An input, output or zone has been disabled on the Control Panel.
Continuous This LED goes continuous on a silence.
CONTROLS
ENABLE
(fire alarm controls)
Yellow Continuous
Fire Alarm Controls and Access Level 2 are enabled through the Enable Key
Switch.
MANUAL
(auto/manual)
Yellow
Continuous Manual mode operation has been enabled from this RSI panel.
Flashing
Manual mode operation has been enabled from the Control Panel or other
remote RSI panel.
General Indication LEDs
System Indication LEDs
System
Controls
Auto/Manual
Key Switch Extinguishant
Release
RSI Information
Window
Fire Alarm
Controls
Enable Key Switch