OVERVIEW
FIKE CORPORATION
Page 4 of 23
Expanded Enclosures Installation Guide
U.L. S2203
Revision No: 1, 11/01
Manual P/N 06-185
F.M. 3009544
The installer should also be familiar with the following documents and standards:
UL 864 – Standard for Control Units for Fire Protective Signaling Systems
UL 1481 – Power Supplies for Fire Protective Signaling Systems
ULC – Standard CAN/ULC-S527-M87
Applicable Local and State Building Codes
Requirements of the Local Authority Having Jurisdiction
2.4 RELATED DOCUMENTATION
To obtain a complete understanding of the wiring for the SHP or Cheetah or to become familiar with
related functions in general, refer to the documentation listed in Table 2.4-1 below.
Document Title
Part Number
Cheetah Manual
06-148
Shark Manual
06-180
SHP Manual
06-130
VESDA LaserCompact Installation Guide
06-189
2.5 EXPANDED ENCLOSURE FEATURES
•
Optional door “unused opening” cover
plate secured by metal hardware
(Cheetah / SHP only)
•
Optional Mounting Plate for a pair
of batteries, up to 18 Amp-Hour, used
to keep batteries off enclosure and
allow use of the bottom knock-outs
•
Enclosure back box width (14.35”/ 36.45
cm) mounts easily between most
building studs
•
Three-bay enclosure provides two
locations for panel display
•
Easily removed door with only two
securing screws (top and bottom pivot
points)
•
Two common backbox sizes for
multiple options
•
Mounting for Cheetah, Shark, or SHP
Control System
•
Optional Mounting Plate for 4” square
modules used in the Cheetah and
Shark control panels
•
Optional Mounting Plate for Cheetah /
VESDA HLI and/or VESDA
LaserCompact
•
Available in Red or Grey
