FIKE CORPORATION
INSTALLATION
U.L. S2203
Expanded Enclosures Installation Guide
Page 23 of 23
F.M. 3009544
Manual P/N: 06-185
Revision No: 1, 11/01
10-2348 - Battery Mounting Plate
Attach plate to bottom bay of enclosure using the hex nut and star washers
provided. The plate is offset from the back box for wire clearance. (Batterie
sold separately)
10-2347 - Addressable Module Mounting Plate
Attach mounting plate to enclosure using the hex nuts and washers provided. When attaching
modules (sold separately) use 1 ½” standoffs on one side of module and the 1” standoff with the ½”
hinged standoff on the other side as shown. Module hardware is provided with plate assembly.
Note: Module covers will not fit when using all locations
BATTERY
BATTERY
Mounting plate
#6-32 Screw
w/ Washer
Typ. 4 Plcs.
Back / inside of
Enclosure
1” Standoff, F/F
Qty: 12
Mounting
Plate
1 ½” Standoff, M/F
Qty: 12
4” Module
Sold Separately
#6-32 Hex Nut
w/ Washer
Hinge Standoff
#6-32 X 1/2”, M/M
Qty: 12
#6-32 Screw
w/ Washer
Typ. 4 Plcs.
Back / inside of
Enclosure
Mounting
Plate
Typ. 6 Places
FRONT VIEW
w/ 2 Batteries (Sold Separately)
Note: very tight fit
