FIKE CORPORATION
EQUIPMENT
U.L. S2203
Expanded Enclosures Installation Guide
Page 5 of 23
F.M. 3009544
Manual P/N: 06-185
Revision No: 1, 11/01
10-055-2-C / 10-060-2-C
Where C = R (Red)
G (Gray)
The basic two-bay enclosure combination provides the main
backbox and door for two bays of fire control system hardware.
Both bays include mounting studs for securing the chosen
hardware mounting plate. It is intended for the control panel to be
installed in the top bay. If not using mounting plates in the bottom
bay, the enclosure will be shipped with vinyl caps covering the
bottom bay press studs. Electrical knockouts are located on all
sides for wire entry.
10-055-3-C / 10-060-3-C
Where C = R (Red)
G (Gray)
The basic three-bay enclosure combination provides the main
backbox and door for three bays of fire control system hardware. The
Cheetah/SHP door has two openings and the Shark door has one
opening. The Cheetah/SHP control panel can be installed in either
the top or middle bay of the enclosure. The Shark Control panel
should be installed in the middle bay only. The unused opening on
the Cheetah/SHP door is to be covered using the cover plate P/N 02-
4832 (included with order). If not using mounting plates in the bottom
bay, the panel will be shipped with vinyl caps covering the bottom bay
press studs. Electrical knockouts are located on all sides for wire
entry.
3.0
EQUIPMENT/PRODUCTS
3.1
EQUIPMENT/PRODUCTS
The 10-055/10-060 Expanded Enclosures consists of a red or gray metal enclosure with removable
door. The enclosures may be flush or surface mounted. They include a 0.5” (1.27 cm) lip around
the back box to facilitate flush mounting. The control panels are available in versatile "2-bay" or “3-
bay” enclosures providing capability for the mounting of optional modules. Refer to the last pages of
this section for a complete detail of the specifications/dimensions.
The basic part numbers for the components covered in further detail in this section are as follows:
10-055-2-C
2 Bay Expanded Cheetah/SHP Enclosure
where C=
10-060-2-C
2 Bay Expanded Shark Enclosure
R for Red
10-055-3-C
3 Bay Expanded Cheetah/SHP Enclosure
G for Gray
10-060-3-C
3 Bay Expanded Shark Enclosure
10-059-P
Cheetah Control System
where P =
10-057-P
Shark Control System
1 for 120VAC
10-058-P
SHP Control System
2 for 240VAC
10-2345
Optional Mounting Plate, Cheetah/VESDA High Level Interface (HLI)
10-2346
Optional Mounting Plate, VESDA LaserCompact
10-2347
Optional Mounting Plate, 4" Square Addressable Modules (up to 6 modules)
10-2348
Optional Mounting Plate, Battery (will hold up to 18AH battery pair)
