PREFACE
FIKE CORPORATION
Page 2 of 23
Expanded Enclosures Installation Guide
U.L. S2203
Revision No: 1, 11/01
Manual P/N 06-185
F.M. 3009544
1.5 SAFETY NOTICES
Be certain to read all the following caution before installing or using this device. Accidental damage
to the device could result if this caution is not heeded!
CAUTION:
The
Expanded Enclosures are intended for mounting Fike manufactured
electronics control systems. This manual refers to only the mounting hardware,
but electronics are frequently shipped with the mounting hardware. Each
electonic control board contains static sensitive components. Handle the module
by the edges only and avoid touching the integrated components. Keep the
module in the protective static bags it was shipped in until time for installation.
Always ground yourself with a proper wrist strap before handling the module(s).
If the installer is grounded at all times, damage due to static discharge will not
occur. If the module requires repair or return to Fike, it must be shipped in an
anti-static bag.
