Fidelity Electronics A10 Operation Manual Download

Page: 67 / 98

Appendix I: - TSC Printer Installation, Setup & Label Upload Procedures

I.1 Get the below ready before Printer Installation

An appropriate cable to connect printer and computer. This cable usually comes with the printer. If not,
contact your printer supplier.

Printer installation driver. This driver usually comes with the printer. If not, contact your printer supplier.

Diagnostic tool for the printer. This tool usually comes with the printer. If not, contact your printer supplier
or download it at –

https://www.fi-measurement.com/files/1/Drivers%20&%20Softwares/DiagTool_V163.zip

TCF file for the label printer. The suitable TCF file can be downloaded at: -

www.fi-measurement.com/resource/driversnsoftwares

I.2 Printer Installation

Turn off the printer, connect the appropriate cable, and then turn on the printer.

If the printer supports Plug-and-Play and is connected, the Windows Add Hardware Wizard will detect the
printer and display a dialog for driver installation. Click Cancel and do not install the driver using this
wizard.

Run the Driver Wizard utility from the Installation Directory where the driver files are located.

Select Install Printer Drivers and complete the wizard.

The driver is now installed.

Summary of Contents for A10



































































































Search results

Summary of Contents for A10

Reviews:

Related manuals for A10

Brands by name

Popular brands

Fidelity Electronics A10, Operation Manual

Search results

Summary of Contents for A10

Reviews:

Related manuals for A10

Brands by name

Popular brands