3
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
Danger of electrocution!
FIBARO Switch 2 is designed to operate in electrical home in-
stallation. Faulty connection or use may result in fire or electric shock.
All works on the device may be performed only by a qualified and
licensed electrician. Observe national regulations.
Even when the device is turned off, voltage may be present at its ter-
minals. Any maintenance introducing changes into the configuration
of connections or the load must be always performed with disabled
fuse
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave network’s range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could affect network’s range
negatively.
Every Z-Wave network has its unique identification number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit:
www.fibaro.com.
Required overcurrent protection
FIBARO Switch 2 must be protected with an overcurrent pro-
tection (fuse) with a value not higher than 10A.
!
Summary of Contents for Switch 2 FGS-2 3 Series
Page 2: ......
