Fiat DOBLO 2015, Owner'S Handbook Manual

Page: 83 / 244

81
110
F0V0126
111
F0V0197
WARNING The backrest is correctly
secured when the red band on the
backrest folding handles (A) fig. 112
disappears. This red band indicates
that the backrest is not secured.
112
F0V0127
WARNING When putting the rear seats
(per Doblò/Doblò Combi versions) back
to their normal position, make sure the
seat belts are positioned so they are
ready to use.
58)
ADJUSTING THE SEAT
BELT HEIGHT
59) 60)
The seat belt height can be adjusted to
various positions using the regulator on
the central pillar.
Always adjust the height of the seat
belts to fit the person wearing it: this
precaution could greatly reduce the risk
of injury in the event of collision.
Correct adjustment is obtained when
the belt passes approximately half way
between the shoulder and the neck.
WARNING
56) Never press button (C) fig. 109 when
travelling.
57)
Remember that after a violent impact,
rear-seat passengers who are not
wearing their seat belts not only expose
themselves to significant risk for injury, but
also represent a danger to passengers
occupying the front seats.
58) Make sure that the backrest is
correctly secured on both sides (red bands
B not visible) to prevent it from moving
forward in the event of sharp braking,
causing injuries to passengers.
59)
The height of the seat belts must be
adjusted with the vehicle stationary.
60) After the height adjustment, always
check that the regulator is locked in one
of the preset positions. To do this, push
downwards to enable the locking device
to click if the grip has not been released in
one of the possible positions.