Fiat DOBLO 2015, Owner'S Handbook Manual

Page: 109 / 244

107
to engage first gear (if starting from
N or R , simply move the lever to the
middle position).
Release the brake pedal and press
the accelerator pedal.
136
F0V0326
It is possible to use the ECO
(Economy) function with this mode,
which reduces consumption. Press
button E fig. 137 to turn this function
on.
137
F0V0323
MESSAGES ON THE
DISPLAY
A dedicate message appears on the
display in the following cases:
Reduce gear changes
The warning light comes on in
the panel (together with the message
shown in the display) to signal the
incorrect use of the transmission by the
driver.
Manual mode unavailable
Automatic method unavailable
Clutch overheating
Brake pedal pressure
Press brake pedal
–
Delayed start-
up
Gear not available
Manoeuvre not allowed
Press brake pedal and repeat
manoeuvre
Positioning of the gear lever at N
(neutral)
27) 28) 29)
IMPORTANT
26) Avoid keeping your hand placed on
this lever in between gear changes or
Auto/Manual mode.
27)
If the warning light (together with the
message in the display) continues to
remain on in the panel, contact a Fiat
Dealership.
28)
If the message is still shown in the
display, contact a Fiat Dealership.
29) To keep the clutch in good condition,
do not use the accelerator to keep the
car stationary (e.g. when stopped facing
uphill); the clutch could be damaged by
overheating. Use the brake pedal instead
and operate the accelerator only when you
are ready to set off.
START&STOP
SYSTEM
IN BRIEF
The Start&Stop device automatically
stops the engine each time the
vehicle is stationary and starts it again
when the driver wants to move off.
This improves the efficiency of the
vehicle by reducing fuel consumption,
the emission of harmful gases and
noise pollution.
OPERATING MODE
Stopping the engine
WITH MANUAL GEARBOX
With the vehicle stationary, the engine
stops with the gearbox in neutral and
the clutch pedal released.